ADC2W - Fail to Open Video error

Have some questions or having issues with Amcrest Surveillance Pro? Post them here for the mods and other users to assist you.
Post Reply
eabyrd1506
Posts: 1
Joined: Wed Mar 03, 2021 10:15 am

ADC2W - Fail to Open Video error

Post by eabyrd1506 »

I connect the camera using TCP/ID, and the software sees it, I can view and edit the settings on the camera, but whenever I attempt to start it in Live View I get the above error. I have an ASH-42, and a couple other types of cameras functioning in Live View, but this one stubbornly refuses to pass video. It works fine with the Live view app however.

I'm at a loss, any ideas out there?
JDreaming
Posts: 1
Joined: Sun Mar 28, 2021 9:24 am

Re: ADC2W - Fail to Open Video error

Post by JDreaming »

Sam here, I just updated to ASP verion 2. And I can no longer view the ADC2W camera on the new version. The old version was working fine. I have 3 Amcrest camera. The other 2 camera have no problem with the new ASP version2. But the ADC2W shows green and online. But can't view at all...
Post Reply