ASH47 Overlays

This Forum its to discuss the new Smart Home Devices.
Post Reply
eqnish
Posts: 2
Joined: Fri Dec 02, 2022 8:21 pm

ASH47 Overlays

Post by eqnish »

How do I remove the Time and Channel Overlays on this Camera? On my AD110 I can use the Web API, and on my PoE Cams I can access the web interface, but Amcrest has not given me/us that access!?!??
Attachments
135826[1].jpg
135826[1].jpg (207.19 KiB) Viewed 316 times
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: ASH47 Overlays

Post by Revo2Maxx »

Hello and Welcome to the forum.

I am not sure really. I know that I have mine connected to an Amcrest NVR and I have ASH47W in the name and moved it over to the left bottom of the screen.. About the Time I was able to find a place you can fix that. While it would require you to use ASP. However add it to ASP, Then go to Device Cfg then choose the ASH47, In there you can click on System, General, time setup. Also in ASP you can make the Change to the Name. While it isn't as Fast as my other cameras on the connection to the page for the Name it is there under Camera, Encoding and then Name. Hope this helps
Here to help the best I can.
Be Safe
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: ASH47 Overlays

Post by Revo2Maxx »

Had someone ask me for some more detail on the Name change. So i thought I would post a PIC from ASP on my ash47. So you can see what I was talking about for changing the name.
Screenshot (3699).png
Screenshot (3699).png (198.85 KiB) Viewed 307 times
Here to help the best I can.
Be Safe
Post Reply