Connecting IP Cameras in Various Locations to an NVR

Have some questions or having issues with your DVR/NVR(s), Post them here for the mods and other users to assist you with.
Post Reply
grid56
Posts: 1
Joined: Tue Feb 16, 2021 6:33 pm

Connecting IP Cameras in Various Locations to an NVR

Post by grid56 »

I have five IP cameras in total - three are on one home network and the other two are on another home network in a different location. How can I set up all five cameras in my NVR?
User avatar
Revo2Maxx
Site Admin
Posts: 6764
Joined: Sat Jun 15, 2019 3:05 pm

Re: Connecting IP Cameras in Various Locations to an NVR

Post by Revo2Maxx »

Hello and Welcome to the Forum
While I want to say you can't that isn't 100% true.. However you can't Easy... So what you can do and it would be the best for your network doing such. Is Using ASP to connect to the Cameras Over P2P. What is important is that both locations will need network connected to the Internet.

Then you can setup ASP as a NVR using PC-NVR that it comes with but keep in mind it is better used as a Monitoring device IMHO... Or you could use ASP to Record the 2 other cameras away so you have a local copy to refer to and a tool to monitor them all.

So there are other ways some require loads of Network port forwarding and things that can make for a hard time. That is little more then I personally would want to type out on a CCTV Camera Forum. Maybe looking up you tube or other networking sites on how to make a tunnel connection or setup a VPN as long as your ISP allows such a connection..
Be Safe.
Post Reply