Speed of scrolling

[COLBSTER]

Is there any way to adjust the speed that the camera moves? The software joystick on the app isn't analog and the camera only moves one speed... too fast. I wish you could just slightly move the joystick and have the camera rotate slower.

[Melvin]

Hello Colbster,

The pan/tilt speed of the camera can only be adjusted by logging in to the camera directly from a computer. Once you are at the cameras live view page, you can change the speed on a scale of 1 to 8 with 8 being the fastest. This setting is right below the PTZ control. The following video is a tutorial on setting up cam on a computer.
https://www.youtube.com/watch?v=OA_UPFfoE_U

[jmartinamcrest]

Just to extend this question a bit...

Once the speed has been adjusted by logging directly in to the camera, does that speed "stay" with that camera?
In other words.. If I'm using Blue Iris and I find the speed to fast/sensitive, so I log into the camera and set it to, say, 1 or 2, is this now the speed that Blue Iris will use on that camera?

Thanx in advance for the info.

Jim

[Melvin]

Hello jmartinamcrest,
Yes the settings should stay the way its set and Blue iris will use the same speed.

[jmartinamcrest]

Excellent, just as I was hoping, thank you.

[perseids]

Hello jmartinamcrest,
Yes the settings should stay the way its set and Blue iris will use the same speed.

It has been my experience that I can change the PTZ Speed in the UI to 3 for instance, and once I exit or use the mobile app it always reverts back to 5.

I should say that I am using theIP4M-1051B with updated firmware and WEB Version 3.2.1.619604